Keri-systems LAN-520 Manual de usuario descargar pdf (Pagina 2)

LAN-520 AESP

Installation Guide

Page 2 of 13 P/N: 01519-001 Rev. B

2.0 Installing the LAN-520 AESP to a PXL-500

1. Power down the PXL-500 master controller.

2. On the master PXL-500 controller, remove jumpers from JP6 and JP7.

3. Insert the LAN-520 AESP into TB13 on the PXL-500. Orient the unit as shown in Figure 1.

NOTE: Mounting screws are supplied to secure the LAN-520 AESP to the PXL. The PXL will have to be removed from its

enclosure to do this.

4. Connect the RJ-45 port on the LAN-520 AESP to the network via a patch cable or directly to the host PC via a cross-

over cable.

5. Power up the PXL-500 (if this is a new PXL panel, a RAM reset is required).

Figure 2: Installing the LAN-520 AESP

LAN-520 AESP

Network

PXL-500

Master Controller

Lithium

Battery

JP6

JP7

NOTE: These jumpers

MUST

be removed

or the LAN

connection will fail.

1 2 3 4 5 6 7 ... 12 13

Sin comentarios

Keri-systems LAN-520 Manual de usuario Pagina 2