Keri-systems TAP100 Manual de usuario descargar pdf (Pagina 42)

TAP 100 Application Software Manual

Page 42 Revision 3.3

If all of the assignment information is correct, use your pointing device and select OK. The

TAP100 software will return to the I/O Assignments prompt box and display the following

information.

Once the I/O assignments have been made, you can PRINT a hard copy of the information just

entered. This will allow you to review the I/O assignment information one last time before sending

this information to the control units. To print a hard copy of the I/O assignments, use your pointing

device and select PRINT. The following prompt box will appear.

As the I/O assignment information is being printed, the status bar in this prompt box will monitor

how far along the print process is. When the print job has finished, you can review the I/O

assignment information and verify it is correct. The printout will appear something like this.

I/O ASSIGNMENTS

INPUT INPUTS OUTPUT OUTPUTS

LINKREADER 1234 PC READER 12

1 Reader 2 (01) N PC Reader 2 (02) M

2 -----Available -----

3 -----Available -----

• • •

0 Reader 1 (01) N PC Reader 2 (02) M

MODIFY PRINT SEND CLEAR QUIT

I/O ASSIGNMENTS FOR LINK 1

Input Reader: Sup I/O: No Polarity: Norm. Closed

Input Lines:

Output Reader:

Output Lines:

2 Reader 2

( ) Active ( • ) Normal ( ) Tamper ( ) None

( ) Active ( ) Normal ( ) Tamper (  ) None

[ X ] Send to PC

2 Reader 2

( ) Not Used ( ) Deactivate ( ) Activate (  ) Momentary

(  ) Not Used ( ) Deactivate ( ) Activate ( ) Momentary

OK QUIT

Print Job Progress

0% 100%

Press ESC to abort the print job.

DISABLE

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Sin comentarios

Keri-systems TAP100 Manual de usuario Pagina 42