Keri-systems HPP-100 Manual de usuario Pagina 21
- Pagina / 48
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
HPP-100 Hand-Held Programmer
Revision 3.3 15
Change the Time Zone for Consecutive Cards [N]
Changing the Time Zone for Consecutive Cards allows the time zone for consecutive
cards to be changed to a new value. You must know the slot numbers for the cards to be
changed and they must be consecutive slot numbers.
Example . . . to change the time zone for consecutive cards in slots 10 through 20 to time
zone 2:
Press . . . [3]
CHANGE LEVEL
#: _ _ _ _ TO #: _ _ _ _
Press . . . [0] [0] [1] [0] [ZIP] [0] [0] [2] [0]
(the beginning slot number to
the ending slot number - all
for the new time zone)
[LEVEL] [ZIP]
#: 0 0 1 0 TO #: 0 0 2 0
Press . . . [LVL]
CHANGE LEVEL
LEVEL: _
Press . . . [2] (the time zone for all cards in
the batch to follow)
[SEND] [CLEAR]
LEVEL: 2
Press . . . [SEND]
Printing Functions
NOTE: All printing commands assume a serial printer is connected to the Master Control
Unit.
Verify a Card [G]
- Keri Systems 1
- User Manual 1
- Hand-Held Programmer 1
- Contents 3
- Contents (continued) 3
- APPENDICES 36 4
- Revision 3.3 vi 5
- Hand Held 7
- Programmer 7
- Programming Command Groups 8
- System Preparation 9
- Setting a New PIN 11
- Configuring the Serial Port 12
- HPP-100 Hand-Held Programmer 13
- Revision 3.3 7 13
- Figure 3 - The PC Cable 13
- Figure 4 - The Modem Cable 13
- Command Descriptions 14
- Standard Commands 15
- Set the Unlock Time [N] 16
- Set the Held-Open Time [N] 16
- Card Management Functions 17
- Void a Card [G] 19
- Voiding Consecutive Cards [G] 20
- Change a Card’s Time Zone [N] 20
- Printing Functions 21
- Verify a Card [G] 21
- Print Transactions [G] 22
- Print Enrolled Cards [G] 22
- Print Status Information [G] 23
- Exit Command Mode [n/a] 26
- Define a Time Zone [G] 26
- Set Anti-Passback [N] 27
- Memory Module Functions 28
- Erase the Memory Module [n/a] 30
- Level Commands 31
- Security Functions 33
- Set Daylight Savings Time [G] 34
- Master Control Commands 40
- Clear Reader Memory [N] 41
- Appendices 42
- Revision 3.3 37 43
- Glossary 44
- Revision 3.3 39 45
- Revision 3.3 40 46
- Customer Support Information 47
- Warranty Information 48
Relacionado con productos y manuales para Hardware Keri-systems HPP-100
Hardware Keri-systems KWX-900 Manual de usuario
(14 paginas)
(14 paginas)
Hardware Keri-systems KWX-2.4 Manual de usuario
(14 paginas)
(14 paginas)
Hardware Keri-systems MS-1400 Manual de usuario
(7 paginas)
(7 paginas)
Comelit FT CT 04 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Dla domu Comelit FT CT 04.
Dostarczamy 1 pdf podręczników Comelit FT CT 04 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentarios a estos manuales