Keri-systems HPP-100 Manual de usuario descargar pdf (Pagina 45)

HPP-100 Hand-Held Programmer

Revision 3.3 39

HPP-100 Hand-Held Programmer Quick Start Guide

The following table is a quick reference guide to all commands that are available for the HPP-100 Hand-Held Programmer Guide. The following

information applies to the programmer and all programming commands.

•

While NOT in programming mode:

•

pressing [LVL] toggles Monitor Mode on and off

•

pressing [SND] toggles the LCD display through system status screens (time, date, software version, responding readers).

•

Commands must be entered while in Programming Mode.

•

To enter Programming Mode, the correct, 4-digit PIN must be entered.

•

Pressing the [SND] key completes commands.

•

Press [CLR] at any time to cancel a command in progress.

•

Global Commands apply to all Control Units/Readers on the network. Non-Global Commands apply to either an individual Control

Unit/Reader or to all Control Unit/Readers on the Favorite Reader List (FRL)

•

To select a specific Reader, press [LVL] followed by the Reader number (1-6). The Reader number will appear in the upper-right

field of the LCD display.

•

To select all readers on the FRL, press ZIP (an * will appear in the upper-right field of the LCD display).

Standard Commands G / N Key-In Data Parameters

Set Date G 7 [mm dd yy] SEND month, day, year

Set Time G 8 [hh mm] SEND hour (00-23), minute

Set Unlock Time N 4 [ss] SEND seconds (01-99)

Set Held-Open Time N 5 [ss] SEND seconds (01-99)

Set COB Time N 6 [hh mm] SEND hour (00-23), minute

Enroll Card in Slot and Time Zone G ENRL [slot#] LVL [tz#] SEND (0000-6999), (0-5, 7)

Enroll Cards in Batch Mode G ENRL [slot#] ZIP [slot#] LVL [tz#] SEND (0000-6999), (0000-6999), (0-5, 7)

Void a Card G VOID [slot#] SEND (0000-6999)

Void Consecutive Cards G VOID [slot#] ZIP [slot#] SEND (0000-6999), (0000-6999)

Change Card Time Zone N 3 [slot#] LVL [tz#] SEND (0000-6990), (0-5, 7)

Change Consecutive Cards Time Zone N 3 [slot#] ZIP [slot#] LVL [tz#] SEND (0000-6999), (0000-6999), (0-5, 7)

Check Card G 1 [slot#] SEND (0000-6999)

Print Transactions G 0 0 SEND

Print Enrolled Cards G 2 SEND

Print Status Information G 2 0 SEND

Print the Last nnnn Transactions G 2 1 [nnnn] SEND (0000-9999)

Print Cards from a Time Zone G 2 LVL [tz#] SEND (0-5, 7)

HPP-100 Hand-Held Programmer Quick Reference Guide (continued)

1 2 ... 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

Keri-systems HPP-100 Manual de usuario Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Keri-systems HPP-100